Fishfinder Scrolling; Fishfinder Display Modes - Raymarine a65 Operation Instructions Manual

15.12 Fishfinder scrolling

The fishfinder image scrolls from right to left. You
can pause the scrolling or adjust the scroll speed, to
ease placing of waypoints or VRMs onscreen.
Scroll speed
You can adjust the speed at which the fishfinder
image scrolls. A faster speed provides more detail
which may be useful when you are looking for fish. If
you select a slower speed the information remains
on the display for longer.
Scroll pause
You can pause the display to see a 'snapshot' of
the fishfinder image. When the image is paused
scrolling stops but the depth indication continues to
be updated.
Adjusting the scroll speed
The default scroll speed is 100%, the scroll speed
can be adjusted following the steps below.
From the Fishfinder application menu:
1. Select Presentation.
2. Select Scroll Speed.
The Scroll speed numeric adjust control is
displayed.
3. Adjust the scroll speed to the required setting.
Adjustment increments are as follows:
• 10% increments for values between 10% and
100%
• 100% increments for values between 100%
and 500%
4. Select Back or Ok to confirm and close the
numeric adjust control.
Pausing the screen
The Fishfinder application can be paused.
From the Fishfinder application:
1. Select Menu.
2. Select Scrolling so that Pause is highlighted.
Selecting Scrolling again will resume the scrolling.
Fishfinder application

15.13 Fishfinder display modes

Selecting a display mode for the Fishfinder
application
When using a Legacy, Traditional, CHIRP or
DownVision TM you can select which display mode
you want to use.
From the Fishfinder application:
1. Select Menu.
2. Select Display Mode.
3. Select Select Mode:.
4. Select the required display mode:
• None
• Zoom
• * A-Scope
• * Bottom Lock
Note: * Not available on the DownVision
channel of a DownVision
Note: Display modes are not applicable to
SideVision TM .
Fishfinder zoom mode
The zoom display mode magnifies a region of the
fishfinder screen to display more detail.
This zoom option enables you to:
• Replace the standard fishfinder image with the
zoomed image, or display the zoomed image
alongside the standard fishfinder image.
• Set the zoom factor to a predefined level, or adjust
it manually.
• Reposition the zoomed portion of the image to a
different point in the display.
When the range increases, the area shown in the
zoom window also increases.
Zoom split
With the zoom display mode you can split the
screen and display the zoomed image alongside
the standard fishfinder image (ZOOM SPLIT).
The zoomed section is indicated on the standard
fishfinder screen by a zoom box.
Selecting split screen in zoom mode
From the fishfinder application, with the zoom display
mode selected:
1. Select Menu.
TM
TM sonar module.
215