Switch Between Single Sheets And Continuous Forms - Oki Microline 8480FB User Manual

Switch between Single Sheets and
Continuous Forms
Single Sheets to Continuous Forms
Manual Feed to Front Feed
1. With the printer turned on, press SEL to place the printer off line.
2. If there is a single sheet loaded into the printer, press LOAD to eject it.
3. Press MODE once or twice until you see
the display.
The printer switches paths and returns to the on-line state.
4. If there are continuous forms in the parked position, the printer
automatically pulls them into the print position.
5. If continuous forms are not loaded, the display prompts you to
PAPER
. Load continuous forms on the tractors (see page 19) and press
LOAD to advance them to the print position.
Continuous Forms to Single Sheets
Front Feed to Manual Feed
1. Press SEL to place the printer off line.
2. Press LOAD to park the continuous forms.
The continuous forms retract back to the tractors.
3. Press MODE once or twice until you see
the display.
The printer switches paths and returns to the on-line state.
4. Load a sheet or form on the platform.
8480_3_crop.JPG
Microline 8480FB User's Guide
Loading Print Media • 23
FRONT
on the second line of
MANUAL
on the second line of
INSERT