Wall Tamper (Option) - Optex HX-80N Installation Instructions Manual

3-5

WALL TAMPER (OPTION)

Universal magnet switch may be mounted as a wall tamper.
Installation space for magnet switch is provided on the back of the main unit and the bracket.
Maximum size of an applicable magnet switch: D 9 mm (0.35") × W 40 mm (1.57") × H 9 mm (0.35")
Magnet switch is not included.
Main unit
Wiring sponge pad
-Installation
Install the magnet switch (wall side) to the
1
wall. To determine the installation position,
use the "Installation position template"
provided on the inside cover of the product
package.
Magnet switch (Wall side)
installation position
Magnet switch (Base side)
installation position
- 14 -
Bracket
Wiring Hole
Magnet switch (Wall side)
installation position
Open the wiring knockout with suitable
2
tool e.g. screwdriver.
Magnet switch
(Bracket side)
installation
position