Brickcom NR-2008 User Manual page 73

www.brickcom.com.tw
【Add User】Increases users within the group and settings user access control.
【Modify User】Modify the user and settings user access control.
【Add Group】Add group and settings group access control
Enter into the menu interface of Increase the group, determine the group name, select 83 access control, left click
mouse button to confirm, save the new user group.
【Modify Group】To modify the group attribute which already exists.
【Modify Password】To modify the password of user account.
Select the user，enter old password then enter new password and confirm
Click【confirm】button to make sure modify password.
The password can be set 1-6. Beginning and ending spaces is invalid password, you can have a space in the middle.
Users which has User Account Control permission can change their own passwords, can also modify other users'
passwords.
7.4.8 Network
Network configuration interface can set the NVR network parameters. NVR factory default IP address is
192.168.1.88. The menu contains the network settings of basic setup, advanced settings and network service
application settings.
Basical
72