Trouble Shooting - TANACOM 500S Operating Manual

Trouble shooting

Symptom
The counter displays
Motor does not
respond to the
Did not pull the lever to OFF
power lever
position.
Unstable power source
Battery charge is low.
Cord worn or corroded
Counter display
does not appear.
Incorrect battery connection
The reel jigs on
Low power voltage
its own.
Did not press
at surface
Auto stop
function does
Error for sinker weight or
not work
rocking of the boat
Line is elongated.
Line length has increased
due to stretching.
There are
counter errors.
There was a large tension
change because of catch/loss
of a fish.
Contact your dealer if the reel does not function properly despite the above details being confirmed, in
the event of other problems arising, and to order parts.
Possible causes
0.0 m.
RESET BUTTON
To do
It is a normal function to avoid over
winding. Press RESET BUTTON
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
Connect correctly.
Replace with a recharged battery.
Press RESET BUTTON
to zero with rig at the surface.
Arrange the Auto stop function.
Reset the depth counter at the surface.
Reset the depth counter at the surface.
Reset the line data input.
24
Ref.
page
to
17
8
2
2
4
2
2
to reset depth
16
18
16
16
9-14