Chumming Timer; Functional Setting Operation - TANACOM 500S Operating Manual

Functional setting operation

Chumming timer

This function provides a useful timer.
- This function displays the time passed after the presentation of
your bait or lure. It can be used for chumming, jigging timing or
reeling in your rig.
- The chumming timer starts from 7.0 m on the counter, unless a
specific fishing range has been entered into memory.
Display time is shown in seconds if the remaining time is less than
60 seconds, in minutes if remaining time is more than a minute.
(The timer display cannot be set to OFF.)
･ The chumming timer indication turns off when the line is wound
up to the auto stop depth.
Pressing the
Attention
(5. Chumming timer )
The outer frame expresses 10
seconds with each arch segment.
MODE BUTTON while the timer is in operation re-starts the timer from
For the first minute, the display will read in one
second increments. After one minute, it will
change to one minute increments.
20
RESET
MODE
0.0 .