4. Click the
Device Options
Job Type
(1), then select
(2).
5. Enter your 4-digit password (0000 to 9999): In the
features
list, click PASSWORD1, then select the value of your
choice for that digit under
for each digit of the password, making note of the number you
entered.
6. For collated printing, scroll down under
change the setting for
7. Click OK.
8. Click OK.
The document is processed to a print file and stored on the
printer's hard disk drive.
9. Go to the printer and print out the document using the front panel
(see below).
tab. In the
Secure print
Change
Collate
ES 1220n Postscript Emulation Driver • 38
Printer features
under
setting. Repeat the process
Printer features
to Yes.
list, click
Change setting
Printer
and