Oki ES1220n User Manual page 95

Once someone has set up all the necessary overlay files on the
printer, other users only have to switch on the required settings in the
printer driver to use the overlays.
• The internal hard disk must be installed in the printer to
allow for spooling of the print job before final printing.
• If the hard disk memory is insufficient for the spooled
data,
DISK FULL
• If the software application being used has a collate print
option, this must be turned OFF for overlay to operate
correctly.
• An overlay may consist of more than one component
files.
Creating Documents To Use As Overlays
An overlay can be created in any software application that can
handle logos, letterheads, forms, etc. and can print to a file.
1. With the file to be stored as an overlay open in your application
program, choose
2. Ensure that the
application's Print dialog box.
3. Depending on the application, you may need to select your
printer model, and then click
printer driver settings.
4. Select the Overlay
5. Choose Create Form
selections in the dialog box which appears and click OK.
6. Click Print.
Instead of sending the print job to the printer, this prompts you to
save the print job on your PC's hard disk. Give the file a meaningful
name.
NOTE
is displayed and only one copy printed.
File then Print.
Print To File
tab.
from the drop-down list, then make your
ES 1220n Postscript Emulation Driver • 95
option is switched on in your
Properties... This should open the