Oki ES1220n User Manual page 311

• Overlay elements must be created in the software application
of your choice, then stored on the printer's hard drive using
Storage Device Manager before they can be used.
• If the hard disk memory is insufficient for the spooled data, the
message DISK FULL appears.
• If the software application has a collate print option, it must be
turned OFF before you print overlays.
• Overlay printing cannot be done using the Windows 2000
PostScript driver or the Macintosh driver.
Using Overlays: Windows 2000 and XP PCL
In Windows 2000, overlays can only be printed using the PCL driver.
Defining Overlays: 2000 PCL
1. Click Start
2. Right click the PCL printer icon, then click
Preferences.
The Printing Preferences dialog box appears.
3. Click the Overlay
4. Click Define
5. Under Overlay
6. Under ID Value, enter the ID number for the file saved using the
Storage Device Manager software (see the File List printout).
7. In the Print on Pages
overlay is to be printed, or select
page numbers under
8. Click Add, then click Close.
The overlay you defined appears in the Defined overlays list.
9. Click OK and close the Printers dialog box.
Printing Using Overlays: 2000 PCL
1. Open the document in the software application.
→ Print.
2. Click File
The Print dialog box appears.
3. Click the Overlay
→ → Printers.
Settings
tab.
Overlays.
Name, enter a name for the overlay.
drop-down list, select on which pages the
Custom pages.
tab.
ES 1220n Software Utilities • 311
Printing
Custom and enter specific