Computer Interface Problems - Oki ES1220n User Manual

Print processing cancels.
Possible cause
The printer interface
cable is faulty.
The time out setting is
too short.

Computer Interface Problems

Cannot configure for parallel connection.
Possible cause
The computer
does not support
bi-directional
parallel interface.
Parallel cable does
not meet
specifications.
The interface is
disabled.
Configuration
procedure was not
correctly followed
or cancelled.
Parallel cable is
disconnected or
faulty.
A converter, buffer
or extension cable
is being used.
Remedy
Replace the printer interface cable.
Reset time out in the menu to a higher value
(
SYS CONFIG MENU
Remedy
There is no fix for this problem. You should only use
a computer that does support a bi-directional
parallel interface.
Use a bi-directional parallel cable to IEEE 1284
standard.
Check that the parallel interface is set to enable in
the menu (see "Parallel Transmission Mode" on
page 276).
Configure again from the beginning.
Reconnect or try another cable.
Test by connecting printer and computer directly.
ES 1220n Troubleshooting • 280
→
WAIT TIMEOUT
).