2. Click
Projects
The Project dialog box opens.
3. Click
Projects
the project on your hard drive or your network, then click Save.
Step 3: Add Files to the Project
1. Click
Projects
The Open dialog box appears.
2. Make sure
drop-down list.
3. Browse to the folder where the files are saved and select the
files you wish to add to the project, then click Open.
The Information dialog box appears.
4. Click OK.
The files are saved as HST.
5. Repeat steps 1 through 4 until you have added all the files you
wish to add to the Project.
To delete a file from the project, click the file name, then
click Projects
→
New
Project.
→
Save
Project, enter the path/name for storing
→
Add File to
PRN files (*.prn)
NOTE
→
Remove File from Project.
ES 1220n Software Utilities • 300
Project.
is selected in the
Files of type