Creating PostScript Forms
PostScript forms are the ones to use if you are not
experienced with PCL Macro commands.
Creating & Downloading a PostScript Project
Remember that file names and paths are case sensitive.
Step 1: Create the Forms in Your Software Application
1. Create the document in your software application.
2. Click
File
selected.
3. Select
Print to
4. Engage the Encapsulated PostScript (EPS) output option.
Windows Me/98/95:
– Click
Properties
– Click the PostScript tab, then, if it is not already selected, click
Encapsulated PostScript
Windows NT 4.0:
– Click
Properties
– Scroll down to
PostScript Output Option
PostScript
5. Click OK.
6. Print the document to a file using the extension PRN.
Step 2: Create a New Project
1. Open Storage Device Manager.
Important!
→
Print
and make sure the PostScript driver is
file.
(or your application's equivalent).
(or your application's equivalent).
PostScript Options
(EPS).
ES 1220n Software Utilities • 299
NOTE
(EPS).
and click it, then click
and select
Encapsulated