Remote Control - LENCO DVL-2010 User Manual

REMOTE CONTROL

POWER\STANDBY: Set the unit in standby mode;
1
press it again to switch it on.
2 MEDIA: Select USB mode.
: PLAY/PAUSE in TIMESHIFT and USB mode.
3
D.SETUP: Display the main disc menu.
4
: Stop playing.
5
AUDIO/LANG: Switch available soundtrack (TV); Switch
6
available soundtrack language (DVD).
S.MODE: Select the sound mode.
7
8 NUMBER BUTTONS (0-9): Press to select a TV channel
directly when watching TV. The channel changes after 2
seconds.
9 -/--: Switch the digits.
10 VOL +/-: Turn the volume up/down.
11 GOTO: Jump to a different chapter of the DVD.*
12 ANGLE: View DVD playback from different angles, if the
DVD has this feature.*
13 MENU: Display the main TV menu.
14 DISPLAY: Display information of the current program.
15 OK: Confirm selection.
16 ◄/►/▲/▼: Press the LEFT/RIGHT/UP/DOWN button
to navigate the on-screen menus and adjust the system
settings to your preference. Press OK to confirm your
selection.
17 SOURCE: Switch the input source.
18 D. MENU: Display the main disc menu.*
19 EXIT/TITLE: Exit from the main TV menu displayed on
the screen; Display the DVD title menu. (DVD)*
20 REPEAT: Repeat different chapters/titles or an entire
DVD.*
10