Pc/Vga Mode - LENCO DVL-2010 User Manual

PC/VGA MODE

Connect a personal computer to this unit.
-
Power on your computer and this unit.
-
Press SOURCE on the unit or remote control to select the PC-RGB (VGA) input source.
-
Press MENU to display the main menu and select "PICTURE" using the LEFT/RIGHT navigation
-
button.
- Use the UP/DOWN navigation button to highlight "SCREEN" and press the OK or RIGHT
navigation button to enter it.
Press the UP/DOWN navigation button to select your preferred item.
-
Press the OK or RIGHT navigation button to enter the submenu. Press the LEFT/RIGHT
-
navigation button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen automatically.
2. H-Offset
This item is used to adjust the value of horizontal position.
3. V-Offset
This item is used to adjust the value of vertical position.
4. Size
This item is used to adjust the signals transfer speed.
5. Phase
This item is used to adjust the picture apply to the TV.
NOTE: For other menu operations in the PC-RGB (VGA) mode, please refer to the menu operations
of the DTV mode.
45