Main Menu; First Time Installation - LENCO DVL-2010 User Manual


The unit contains different setting menus. Once the initial programming is entered, it will
remain in the memory until changed, and the unit can always be operated under the same
conditions.

The settings will remain in the memory until the settings are changed, even after setting the
player to standby mode.
Common procedure for initial settings
- Press MENU on the unit or remote control to display the main menu.
- Press the UP/DOWN/LEFT/RIGHT navigation buttons to move the cursor.
- Press the OK or RIGHT navigation button to enter the submenu.
Press the MENU button to save the current setting and return to the previous menu page.
-
Press EXIT to exit the menu page.
-
Connect to the power source and turn on this TV, then below setup page will be displayed on
-
the screen.
- Press the UP/DOWN navigation button to move the cursor.
Press the LEFT/RIGHT navigation button to select an option.
-
Language:
select the on-screen menu language.
Country:
select your country.
Energy Mode:
select Home or Store mode.
Tuning Setup
- If above selections are finished, press the OK button to
call out Tuning Setup.
Select your preferred Tune Type and Digital Type using
-
navigation buttons and press OK to start auto tuning.
Note: Items following Digital Type are adjustable only when
Digital Type is DVB-C/Satellite and these items vary for different
digital types.

MAIN MENU

First Time Installation

31