Satellite Mode - LENCO DVL-2010 User Manual

SATELLITE MODE

Tips:
● Connect your Satellite antenna to the RF (S2) terminal first to receive satellite signals.
● Press SOURCE button on remote control to select "Satellite".
1. Auto Tuning
- Press MENU to call out the main menu.
Highlight "Channel" using the navigation buttons
-
and press OK to enter it.
Then highlight "Auto Tuning" and press OK to enter
-
it.
Country: select your country.
Satellite: select an available satellite.
Scan Mode: select your scan mode.
Channel Type: select a channel type.
Service Type: select a service type.
2. Dish Setup
Press MENU to call out the main menu.
-
Highlight "Channel" using the navigation buttons and press OK to enter it.
-
- Then highlight "Dish Setup" and press OK to enter it.
- Press the LEFT/RIGHT navigation button to highlight Left, Middle or Right column.
Press EXIT to return.
-
41