Remote Control - LENCO LED-2213 Instruction Manual

Remote control

MENU INPUT
USB EXIT
DISPLAY
TV/RADIO
DVBS-SAT DVBS-AUDIO DVBS-INFO
SUBTITLE TEXT
FAV
PIC-FORMAT PAUSE EPG
Turn the TV on/standby.
POWER:
Buttons for TELETEXT(In ATV mode)
TV/TXT: Teletext on/off
CANCEL: Turn off the Teletext display
REVEAL: Reveal any hidden text, for example-quiz answer
NICAM/A2
HOLD : Hold or carry on the current subpage
SIZE: Press to see top half of page double size, Press
again to see the bottom half of page double size,
Press again for normal size
SUBPAGE: press to subpage, again to cancel.
INDEX: go to index.
Colour buttons: short cuts-follow the coloured links in
the text.
(In DTV mode, press red key to switch between TV and radio.
Green key, yellow key and blue key are invalid.)
MENU : System setup menu.
Press to display the input source menu.
INPUT:
CH+/- : Scan through channels.
VOL+/- : Adjust the volume.
Cursor left/right up/down : Cursor buttons used in menus.
OK:CONFIRM BUTTON for menu.
EXIT : Exit the OSD menu.
USB: The short cuts to the multtimedia in DVBS mode.
CH+/- : Scan through channels.
VOL+/- : Adjust the volume.
Cursor left/right up/down: Cursor buttons used in menus.
OK:CONFIRM BUTTON for menu.
0-9,-/--
Choose channel directly.
Returns to the previous channel.
5