Table of Contents
Advertisement
Check the following points before assuming malfunctions of this unit:
Symptom [COMMON]
No power.
No picture.
No sound.
Distorted sound.
No operations can be
performed with the remote
control unit.
No key operation (by the
main unit and/or the
remote control unit) is
effective.
Symptom [TV]
No or poor picture.
No sound or poor sound.
Noise or other interface.
GENERAL TROUBLESHOOTING
Insert the power plug securely into the power outlet.
Ensure that the equipment is connected properly.
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV and stereo system are
correct.
Adjust the master volume to a suitable volume by pressing the
VOLUME +/- button.
Check whether the batteries are installed with the correct
polarities.
The batteries are exhausted: replace them with new ones.
Point the remote control at the remote control sensor and
operate it again.
Operate the remote control unit at a distance of no more than
6m from the remote control sensor.
Remove the obstacles between the remote control and remote
control sensor.
Disconnect the power plug and then reconnect it. (The player may not
be operating properly due to lightning, static electricity or some other
factors.)
Adjust antenna or use an external antenna.
Relocate the unit near a window (if inside a building).
Move units away from this product that cause interference.
Do Auto Tuning again.
Try another channel.
Check the audio settings.
Press MUTE on the remote control to cancel the mute function.
Unplug the headphone.
Electronic equipment near the unit is causing interface. Relocate the
unit or move the equipment.
Remedy
Remedy
49
Advertisement
Table of Contents
