Tait TM9300 User Manual page 9

VHF radios must be installed using an antenna
mounted centrally on the vehicle roof, with a gain of
2.15 dBi or 5.15 dBi.
UHF and 800 MHz radios must be installed using an
antenna mounted either centrally on the vehicle roof
with a gain of 2.15 dBi or 5.65 dBi, or centrally
mounted on the trunk with a gain of 5.65 dBi.
900 MHz radios must be installed using an antenna
mounted either centrally on the vehicle roof or
centrally mounted on the trunk with a gain of 2.15 dBi
or 8 dBi.
For radios with a transmit power of 25 W:
The radio must be installed using an externally
mounted antenna with a gain of either 2.15 dBi or
5.15 dBi.
This radio emits radio frequency (RF) energy or radio
waves primarily when calls are made. RF is a form of
electromagnetic energy (as is sunlight), and there are
recommended levels of maximum RF exposure.
To control your exposure to RF and comply with the
maximum exposure limits for occupational/controlled
environments, follow these guidelines:
Do not talk (transmit) on the radio more than the
■
rated transmit duty cycle. This is important
because the radio radiates more energy when it is
transmitting than when it is receiving.
While you are transmitting (talking or sending
■
data) on the radio, you must ensure that there is
always a distance of 35 inches (0.9 m) between
people and the antenna. This is the minimum
safe distance.
Use the radio only with Tait-approved antennas
■
and attachments, and make only authorized modi-
fications to the antenna otherwise you could dam-
age the radio and violate FCC regulations.
For more information on what RF energy is and how
to control your exposure to it, visit the FCC website at
www.fcc.gov/oet/rfsafety/rf-faqs.html.
For your safety 9