Making An Encrypted Call; Receiving An Encrypted Call - Tait TM9300 User Manual

Making an encrypted call

Receiving an encrypted call

104 Encryption
1 Select the network you wish to operate on.
2 Check that encryption is on (
the display).
3 Press and hold the PTT key to transmit.
While you are transmitting, the red LED glows and
appears in the display.
If you transmit or receive an unencrypted call on
an encrypted network, the
your radio may be programmed to issue an
audible alert.
When you receive an encrypted call, your radio
unmutes and you can hear clear speech, so long as
the key required to decode the call is stored in
your radio.
If the key required to decode the call is not stored in
your radio, then your radio remains muted and the
message Key fail appears.
If you transmit or receive an unencrypted call on
an encrypted network, the
your radio may be programmed to issue an
audible alert.
is showing in
disappears and
disappears and