Changing The Radio's Operating Mode - Tait TM9300 User Manual

Changing the radio's operating
mode
40 Basic operation
The way your radio performs basic functions, such as
sending and receiving calls, depends on the operating
mode of your network. The two operating modes that
may be available on your radio are:
conventional mode (see
■
tional mode" on page
trunked mode (see
■
on page 69).
To change your operating mode:
1 Press Menu and select Change mode.
Main menu
Change mode
Channels
Back
(Depending on how your radio is programmed, you
may be able to press a function key to change
mode.)
2 Select Yes to confirm your selection, and your
radio now shows the default display for either
trunked or conventional.
The following examples show typical default
displays for trunked and conventional modes.
Network 1
200-20001-20
trunked mode
"Operating in conven-
42), and
"Operating in trunked mode"
Select
16A
Menu
Channel 1
Zone 2
Menu
conventional mode