Rinse Aid And Detergent; Chap 3 Risks And Important Warnings - Bartscher 109.245 Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
INSTRUCTION MANUAL FOR DISHWASHERS
GB
With discharge pump (available
on request)
Rinse aid is dispensed by the hydraulic dispenser installed standard on the
machine.
Dispensing of detergent is manual, even if installation of an automatic dispenser
is always recommended.
Dispensing is established based on water hardness by the installation
technician, who will also calibrate the dispensers.
The level of liquids in the container must be high enough that it can be
drawn. It must never empty completely, or be topped off with corrosive or
impure products.
This appliance is to be used only for the use for which it was expressly designed. All other uses
are to be considered unfit and therefore dangerous.
The specialised personnel who will install the machine are obliged to appropriately
instruct the user on the appliance's operation and any safety measures that are to be
complied with, also by providing practical demonstrations.
Any type of service done on the machine, also in the case of failure, must be performed only by
the manufacturer or by an authorised service centre and by qualified personnel, using only
original spare parts
Always disconnect or separate the machine from the electric and water networks before
performing maintenance, repairs or cleaning.
Untrained personnel must NOT use the machine.
The machine must NOT remain powered on when it is not in use.
NEVER open the machine door quickly if it has not finished the cycle.
NEVER use the machine without the factory-installed safety attachments
NEVER use the machine for washing object of a type, shape, size or material not guaranteed
for machine washing or not perfectly intact.
NEVER use the appliance or its parts as a ladder or support for people, things or animals.
NEVER immerse bare hands in the washing solutions.
NEVER turn the machine over after installation.
If the drain is not at a lower level than the base of the machine, you
can use the version equipped with a discharge pump (available on
request).
In this case the maximum drain height is 710mm.
Always check that the drain works properly and that it is not clogged.
All other solutions must be previously agreed upon and approved by
the manufacturer.

Chap 3 RISKS AND IMPORTANT WARNINGS

.

2.6 Rinse aid and detergent

4
.

Advertisement

Table of Contents
loading

Table of Contents