Robot Control Panel - ECOVACS DEEBOT D8 Instruction Manual

2.4 Robot Control Panel

D80
START/PAUSE key
2.5 Remote Control with LED Screen
Front View
Notice
7
EN
D83
Spot Cleaning
Mode key
Return to Charger Button: Start Return to Charger Mode.
AUTO Cleaning Mode Button: Start AUTO Cleaning Mode.
Start/Pause/Confirm Button: Push to Start or Pause the current function
Direction Control Button: Push and hold the appropriate button to drive the robot in
any direction.
Set Cleaning Time Button: Set the time for the robot to automatically clean.
Set Current Time Button: Set the current time of day.
Spot Cleaning Mode Button: Start Spot Cleaning Mode.
Intensive Cleaning Mode Button: Start Intensive Cleaning Mode.
Edge Cleaning Mode Button: Start Edge Cleaning Mode.
Please make sure the Remote
Control's batteries are properly
installed and Bottom Power
Switch ON.
The robot is not able to vacuum
when it is being moved using
the Remote Control.
Remove batteries if Remote
Control will not be used for
a long time.
Edge Cleaning
Mode key
START/PAUSE key
Intensive Cleaning
Mode key
Return to Charger
Mode key
When using the Remote
Control, be sure to point it
towards the infrared signal
receiver on the robot, and be
within 16 feet of the robot.
The Charging Dock or other
sources that use an infrared
signal may interfere with the
Remote Control signal.