2
Chapter 1 Product Introduction
1.3 Appearance And Components
1.3.1 Appearance
The UPS appearance is shown in Figure 1-1.
1.3.2 Components
Front panel
As shown in Figure 1-2, the UPS front panel provides ventilation holes and display panel.
Rear panel
As shown in Figure 1-3, the UPS rear panel provides DIP switch, parallel port, ventilation hole, bypass terminal block,
input MCB, bypass MCB, battery port, USB port, REPO port, 10A charger control port, intelligent card slot and I/O
terminal block.
USB port
REPO port
Display panel
DIP switch
Parallel port
10A charger control port
Liebert
®
Figure 1-1 UPS appearance
Ventilation hole
Figure 1-2 UPS front panel
Bypass terminal block
Ventilation hole
Intelligent card slot
Figure 1-3 UPS rear panel
ITA 10kVA UPS User Manual
Bypass MCB
Input MCB
Battery port
I/O terminal block