The parameters of the single UPS can be set through the LCD display panel; the parameters are listed in Table 4-5.
Parameter
Output voltage
Self-test cycle
ECO function
EOD startup
Language
Alarm message
Alarm parameters
Figure 4-5 Structure diagram of the menu interface
Table 4-5 Parameter settings of the single UPS
Description
Set the level of the output voltage
Set the self-test cycle of the battery
Set whether the ECO function is active
Set whether the startup is automatic
Set the LCD displayed language
Liebert
ITA 10kVA UPS User Manual
®
Chapter 4 Display Panel
Default
220V
Disabled
Disabled
Enabled
Chinese
37