Dhcpv6 Port Configure - ZyXEL Communications MES3500 series User Manual

Table 134 IP Application > DHCP > DHCPv6 > Options Profile (continued)
LABEL
Add
Cancel
Profile Name
Option18
Option37
Option38
Referenced
Delete
Cancel

37.5.2 DHCPv6 Port Configure

Use this screen to apply a different DHCPv6 options profile to certain ports in a VLAN. To open this
screen, click IP Application > DHCP > DHCPv6 > Port.
Figure 185 IP Application > DHCP > DHCPv6 > Port
The following table describes the labels in this screen.
Table 135 IP Application > DHCP > DHCPv6 > Port
LABEL
VID
Port
Options Profile
Chapter 37 DHCP
DESCRIPTION
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to their last saved values.
This field displays the descriptive name of the profile. Click the name to change the settings.
This field displays whether the Interface-ID option is added to client DHCP requests.
This field displays the information that is included in the Remote-ID option.
This field displays the information that is included in the Subscriber-ID option.
This field displays whether this profile is in use by a feature, such as DHCPv6 relay.
Check the entry(ies) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
DESCRIPTION
Enter the ID number of the VLAN you want to configure here.
Enter the number of port(s) to which you want to apply the specified DHCPv6 options
profile.
You can enter multiple ports separated by (no space) comma (,) or hyphen (-). For
example, enter "3-5" for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.
Select a pre-defined DHCPv6 options profile that the Switch applies to the specified port(s)
in this VLAN.
The profile you select here has priority over the one you select in the DHCP > DHCPv6
screen.
MES3500 Series User's Guide
288