Igmp Filtering Profile - ZyXEL Communications MES3500 series User Manual

Table 74 Advanced Application > Multicast > Multicast Setting > IGMP Snooping VLAN (continued)
LABEL
Name
VID
Delete
Cancel

25.2.3 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch
are able to join. A profile contains a range of multicast IP addresses which you want clients to be
able to join. Profiles are assigned to ports (in the Multicast Setting screen). Clients connected to
those ports are then able to join the multicast groups specified in the profile. Each port can be
assigned a single profile. A profile can be assigned to multiple ports.
Click Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile to
display the screen as shown.
Figure 107 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
The following table describes the labels in this screen.
Table 75 Advanced Application > Multicast > Multicast Setting > IGMP Filtering Profile
LABEL
Profile Name
Start Address
End Address
Chapter 25 Multicast
DESCRIPTION
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Check the rule(s) that you want to remove in the Delete column, then click the Delete
button.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the profile
name and specify a different IP multicast address range.
Type the starting multicast IP address for a range of multicast IP addresses that you want
to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that you want to belong
to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address and
End Address fields.
MES3500 Series User's Guide
195