Create An Ip-Based Vlan Example - ZyXEL Communications MES3500 series User Manual

Table 22 Advanced Application > VLAN > VLAN Port Setting > Protocol Based VLAN (continued)
LABEL
Name
Ethernet-type
VID
Priority
Delete
Cancel

9.7.2 Create an IP-based VLAN Example

This example shows you how to create an IP VLAN which includes ports 1, 4 and 8. Follow these
steps using the screen below:
Activate this protocol based VLAN.
1
Type the port number you want to include in this protocol based VLAN. Type 1.
2
Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
3
Select the protocol. Leave the default value IP.
4
Type the VLAN ID of an existing VLAN. In our example we already created a static VLAN with an ID
5
of 5. Type 5.
Leave the priority set to 0 and click Add.
6
Figure 45 Protocol Based VLAN Configuration Example
To add more ports to this protocol based VLAN.
Click the index number of the protocol based VLAN entry. Click 1
1
Change the value in the Port field to the next port you want to add.
2
Chapter 9 VLAN
DESCRIPTION
This field shows the name the protocol based VLAN.
This field shows which Ethernet protocol is part of this protocol based VLAN.
This field shows the VLAN ID of the port.
This field shows the priority which is assigned to frames belonging to this protocol based
VLAN.
Click this to delete the protocol based VLANs which you marked for deletion.
Click Cancel to begin configuring this screen afresh.
MES3500 Series User's Guide
EXAMPLE
100