Connections; Usb Connection; Network Connection - Oki B2500 Series User Manual

B2520 / B2540
18 Select your choice and click on the F
19 Your "Companion Suite Pro" kit is successfully
installed on your PC.
You can start the multifunction machine's management
software from the
> C S > C
OMPANION UITE
> MF D or by clicking on the icon MF D
IRECTOR
located on your desktop.
It is possible to add LAN printers without
installing the Companion Suite Pro software
on Windows 2000 and XP. From the Windows
menu Start > Parameters > Printers and faxes,
select "Add Printer" and follow the instructions
on screen.

Connections

Make sure that your multifunction machine is powered off.

USB Connection

The connection between the PC and the machine
requires a USB 2.0 shielded cable no more than 3 meters
long.
It is recommended to install the
Companion Suite Pro software first and
then to connect the USB cable to your
machine.
If you connect the USB cable before installing
the Companion Suite Pro software the
recognition system (plug and play) identifies
automatically that new hardware has been
added. To start your machine drivers
installation, follow the instructions on screen. If
a window asking about the location of the
drivers pops up, then indicate the installation
CD-ROM.
1 Locate your USB cable connectors and connect as
shown below on the picture.
2 Power on your multifunction machine.
The A
DD HARDWARE
3 Click on the N button to finish the installation.
EXT
4 Select F
IND THE APPROPRIATE DRIVER FOR MY
(
HARDWARE RECOMMENDED
button.
INISH
menu S > P
TART ROGRAMS
S P
OMPANION UITE RO
IRECTOR
assistant window appears.
). Click on the N
EXT
button.
5 Select the location where the system has to look for
the driver. Only the CD-ROM
to be ticked. Click on the N
takes a few moments.
6 A window informs you that the driver has been
LL located. Click on the N
7 A screen informs you that the XML interface
software has been installed. Click on the F
button.
The
ADD HARDWARE
8 Click on the N
9 Select F
IND THE APPROPRIATE DRIVER FOR MY
(
HARDWARE RECOMMENDED
button.
10 Select the location where the system shall look for
the driver. Only the CD-ROM
to be ticked. Click on the N
takes a few moments.
11 A window informs that the driver has been located.
Click on the N
12 A screen informs you that the C
P F@X
RO ACTIVITIES
Click on the F
You can now use the multifunction machine to print or
scan your documents.

Network connection

You may connect your multifunction terminal to an
Ethernet or a wireless network (model B2540 only).
The Companion Suite Pro LL software shall be
installed to perform this operation.
1 Run the MF Director application by clicking on the
icon located on your desktop or from the menu
S > P
TART ROGRAMS
> C
OMPANION
2 Click on the N
procedure.
- 44 -
checkbox has
DRIVES
button. The search
EXT
button.
EXT
assistant window appears.
button.
EXT
). Click on the N
checkbox has
DRIVES
button. The search
EXT
button.
EXT
OMPANION
software has been installed.
button.
INISH
> C S
OMPANION UITE
S P LL > A
UITE RO DD PRINTER
button to run the installation
EXT
INISH
EXT
S
UITE
.