Sms; Sms Parameters; Presentation Of The Sender; Sms Center Transmission Number - Oki B2500 Series User Manual

B2500 series mfp
Hide thumbs Also See for B2500 Series:
Table of Contents

Advertisement

B2520 / B2540

SMS

Thanks to the SMS button, you can send an SMS to
subscribers all over the world. An SMS (Short Message
Service) is a service which permits short written
messages to be sent to mobile phones or other SMS-
compatible devices.
The number of characters you can send per message is
dependent upon the service provider and the country you
are sending your SMS from (e.g. France 160 characters,
Italy 640 characters).
The SMS service is dependent upon the country and the
service provider.
There is a special scale of charges for the
SMS service.

SMS Parameters

Presentation of the sender

This setting allows you to show the name or the number
of the sender when sending an SMS.
1 Select the option WITH or WITHOUT presentation
of the sender using the
2 Validate with OK.

SMS Center transmission number

This setting allows you to enter the transmission number
for the SMS Server. Your Internet provider will provide
you with this number.
421 - SMS SERVICE / INIT. SMS / SERVER
1 Enter the number of the transmission server using
the digital keypad.
2 Validate with OK.
41 - SMS SERVICE / SENDER
or
keys.

Sending an SMS

1 Press the
2 Write your SMS using the alphabetical keypad.
To do so, an editor is at your disposal:
for upper case letters, use the
to move inside the data entry field, use
and
,
to move in the text from one word to another,
press CTRL and one of the navigator keys
(
or
).
to go to the next line, use
to delete a character (by moving the cursor to
the left), use
3 Validate with OK.
4 Dial the number of the recipient (mobile phone or
any other SMS-compatible device) in one of the
following ways:
dial the number using the digital keypad,
enter the first letters of the recipient name,
press the
appears (names are classified in alphabetical
order).
Your SMS may be sent to only one person or to
several people. To send an SMS:
to only one person, press OK to confirm,
to several people:
5 Press the
number.
6 Repeat the operations as many times as required
(10 persons max.). Press OK to validate the last
recipient; "SENDING SMS" is displayed as the
SMS is being sent.
If SMS appears, then the SMS has been put on hold
and a further attempt will take place a couple of
minutes later. To immediately execute or cancel
transmission, refer to paragraph Transmission
waiting queue, page 19.
To check the SMS has been sent properly, you may
print the transmission/reception log (refer to paragraph
Printing the logs, page 28).
- 22 -
key.
key,
,
or C.
key until the required name
key and enter the next recipient's

Advertisement

Table of Contents
loading

This manual is also suitable for:

B2520B2520 mfpB2540 mfp

Table of Contents