Software Specifications - ATTO Technology ATTO Celerity FC-41XS Installation And Operation Manual

• External LEDs for on-line and speed status for
each channel
• Two pluggable optical LC SFP transceivers
included
Celerity FC-44ES Adapter
The Celerity FC-44ES leverages two next-
generation storage technologies: PCI Express
Interconnect and 4-Gigabit Fibre Channel.
With 4-Gb FC speeds of up to 800 MB/sec. per
channel, the FC-44ES supports the most
demanding application requirements, including
high-definition video, rich content databases and
other high bandwidth environments.
The FC-44ES takes advantage of the latest in host
interconnect technology, PCI Express, a serial,
high-speed connection that supports aggregate
throughput up to 2.2 GB/sec. (x8PCIe). With
software compatible with existing PCI and PCI-X
products, the FC-44ES uses the same device
drivers as the other Celerity FC family products,
simplifying installation and support.
Hardware specifications
• Four independent Fibre Channel ports
• 4-Gigabit data transfer rates per channel
• 800 MB/sec. maximum full-duplex throughput
per channel
• Supports all FC topologies: direct fabric,
arbitrated loop and point-to-point
• ANSI Fibre Channel: FC-PH, FC-FCP, FC
FCP2, FC-AL, FC-AL2, FC-PLDA, FC-FLA
• Flash ROM for easy field upgrades
• FC Class 3 support
• Local management and diagnostics
• Buffer credits: 8 @ 512 Bytes; 8 @ 2kB
Advanced FC capabilities
• Supports SNIA HBA API
• On-demand automatic negotiation among 4-Gb,
2-Gb and 1-Gb Fibre Channel
• Supports Target and Intitiator modes
• Supports Windows FDMI and WMI
• Supports Exclusive Advanced Data Streaming
TM
(ADS ) Technology

Software specifications

• Windows XP, 2000 and Server 2003
®
• Red Hat Linux (2.4 and 2.6 kernel)
®
• SUSE Linux (2.6 kernel)
Host bus specifications
• x8 mechanical and x8 electrical PCI Express
Interconnect
• Conforms to PCI Express Base Spec 1.0a
• Conforms to PCI Express CEM Spec 1.0a
• PCI to PCI/PCI-X Bridge spec 1.0
Environmental & physical specifications
• Conforms to PCI standard height, half length
form-factor specifications
• Length: 6.525 inches
• Height: 3.81 inches
• Operating Temperature: 0-45ºC (32º-113ºF)
• Storage Temperature: -40º to 70ºC (-40º to
158ºF)
• Relative Humidity: 5 to 95% non-condensing
• 12V@ 2.1A (max.)
• 3.3V @ 3.0A (max.)
• 100 lf/m (minimum) airflow recommended
External connectivity
• Easy-to-install full height connection plate
• External LEDs for on-line and speed status for
each channel
• Four pluggable optical LC SFP transceivers
included
Software specifications
• Windows XP, 2000 and Server 2003
• Red Hat Linux (2.4 and 2.6 kernel)
• SUSE Linux (2.6 kernel)
2