Atto Expresspci Provides Fibre Channel Solutions; Advanced Scsi Support; Environmental, Physical Specifications - ATTO Technology ExpressPCI FC 2600 Installation And Operation Manual

1 ATTO ExpressPCI provides Fibre Channel solutions

All ATTO ExpressPCI models have been designed to ensure interoperability with Fibre Channel devices
and compatibility with a broad range of servers and workstations to meet your needs.
The ATTO ExpressPCI FCSW and ATTO
ExpressPCI 2600 host adapters offer high
performance for your applications. Each
conforms to a strict interpretation of Fibre
Channel specifications to ensure the adapter will
work with a variety of other SAN (Storage Area
Network) components.
The ExpressPCI FCSW is a 64-bit PCI-to-Fibre
Channel host adapter with a fixed short wave
optical Fibre Channel interface.
The ExpressPCI 2600 is a 64-bit PCI-to-Fibre
Channel host adapter with a fixed copper HSSDC
interface.
❖
Strict adherence to ANSI FC-AL-2, FC-
PLDA, FC-Tape and FC-FLA
specifications
❖
1.0625-Gigabit data transfer rates,
providing up to 200 MB/sec. throughput
in full duplex mode
❖
Support for Class 2 and Class 3 transfers
❖
Point-to-point, arbitrated loop and direct
fabric/switch attach topologies support
❖
ASPI and SCSI Manager 4.3 compatible
❖
Multiple initiator support
❖
LEDs for online and fault status
❖
®
Windows XP/2000/NT; Windows
95/98; Linux, Sun
Macintosh® OS, OS X
❖
RAID kits available
❖
SNIA Fibre Channel host adapter API
support
1
ATTO Technology ExpressPCI FC 3321 Installation and Operation Manual
®
Solaris and

Advanced SCSI support

❖
Exclusive Advanced Data Streaming
TM
(ADS ) Technology support
❖
SCSI-FCP over Fibre Channel support
❖
SCSI-3 tagged command queuing
❖
Large command FIFO
❖
Disconnect/reconnect support
❖
Asynchronous I/O support
❖
Bootable from attached disks
Accelerated PCI bus management
❖
PCI 2.2 and PCI 99 compliant
❖
PCI BusMaster rate of 528 MB/sec. in
64-bit/66 MHz PCI slots
❖
66MHz/64-bit PCI compatible.
Backward compatible to 33MHz and 32-
bit PCI
Environmental and physical
specifications
❖
Temperature: 0-50° C
❖
Humidity: 10-90% non-condensing
❖
Short Card Form Factor
❖
Length: 6.521"
❖
Height: 4.2"
❖
MTBF: 150,000 hours
❖
MTTR: <15 minutes
❖
Power Requirements 1 Amp @ 5 Volts