Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Enable
If you have lights flickering in your camera video, try enabling antiflicker.
Antiflicker:
Otherwise, you should leave this disabled.
Flip Image:
Select this box to vertically flip the video.
Mirror:
Horizontally flip the video.
Note: If the camera is installed upside down, Flip Image and Mirror should
both be checked
Brightness
Allows you to adjust the brightness level. Select a setting between -5 and
Control:
+5.
Contrast
Allows you to adjust the contrast level. Select a setting between -5 and +5.
Control:
Saturation
Allows you to adjust the saturation level. Select a setting between -5 and
Control:
+5.
D-Link DCS-5020L User Manual
Image Setup
28
28