Alert Messages (Printed On Error Logs And Reports) - Ricoh Aficio SP 8300DN User Manual

3. Troubleshooting
Messages during Direct print from a memory storage device
Message
"Unable to access the
specified memory storage
device."
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."

Alert Messages (Printed on Error Logs and Reports)

This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Message
"84: Error"
86
Causes
The memory device used
cannot be recognized.
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds
1 GB.
Cause
There is no work area
available for image
processing.
Solutions
For details about the recommended
memory devices for the Direct printing
function from memory storage devices,
contact your service representative. The
USB flash memory device that features
password protection or other security
features may not work normally.
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print by using a
function other than the Direct
printing function from memory
storage devices.
You cannot select files of different
formats at the same time.
Solution
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Decrease the number of files sent
to the printer or install the optional
SDRAM module. For details about
installing SDRAM module, see
"Installing the SDRAM module",
Operating Instructions.