Transporting Or Storing The Printer; Preparing The Printer For Shipment - Epson Stylus Pro 4000 Printer Manual

90 | Maintaining and Transporting the Printer
The printer weighs about 88
2. Open the roll paper cover and remove the roll paper. Remove any sheets
from the paper tray. Use a soft brush attachment to vacuum the paper
tray.
3. If the paper path accidentally gets soiled with ink, gently clean it with a
soft, lint-free cloth dampened with water.
4. If the outer case is dirty, clean it with a soft, clean cloth dampened with
mild detergent. Keep the ink cartridge compartment closed to prevent
water from getting inside.

Transporting or Storing the Printer

If you are moving the printer a short distance (for example, in the same
building), raise the ink levers and have at least two people lift the printer.
To ship the printer, you must repack it using the original box and packing
materials and secure it to a pallet. If you do not have these items, contact
EPSON to request them. Otherwise, the printer may be damaged beyond
repair.
If your printer includes the EpsonNet Ethernet card, you should remove it
before shipping the printer for repairs. See page 130 for instructions.

Preparing the Printer for Shipment

1. Turn the printer on and remove the following parts:
All paper or other media
•
Roll paper spindle
•
Paper tray
•
2. If you are using the 110 ml ink cartridges, leave them installed. If you
are using 220 ml cartridges, remove them and install 110 ml cartridges.
If you have the original cartridges that came with the printer (even if
they are empty), install them before shipping the printer.
4-90