Checking Printer Status And Part Life; Printing Status Information - Epson Stylus Pro 4000 Printer Manual

74 | Maintaining and Transporting the Printer
Note: You can replace
the ink cartridges, cutter
blade, and maintenance
tank yourself. Other
printer parts need to
be replaced by an
authorized EPSON
service technician.
Note: You can replace the
ink cartridges, cutter
blade, and maintenance
tank yourself. Other
printer parts need to
be replaced by an
authorized EPSON
service technician.
2. Press the
Menu
3. Press the button so you see
see
NOZZLE CHECK
4. Press so you see
.
PRINT
5. Press again to start printing.
Menu
The amount of ink left or the component life is indicated as follows:
= 100–81% ink or service life remaining
E*****F
= 80–61%
E**** F
= 60–41%
E*** F
= 40–21%
E** F
= 20–11%
E* F
= less than 10% ink or service life remaining
%
Viewing Status Information
To view printer status information instead of printing it, follow these steps:
1. Press the
Menu
2. Press the button until you see
. You see
Menu
3. Do one of the following:
To check the amount of ink left, press
•
then press
Menu
black) is displayed, using the
Continue pressing
To check how much of the maintenance tank has been used, presss
•
until you see
the tank is displayed, using the
To check the amount of ink used (in milliliters) and paper used
•
(in square meters), press
press
Menu
4-74
button. You see
PRINTER SETUP
TEST PRINT
.
, then press
STATUS CHECK
button. You see
PRINTER SETUP
PRINTER STATUS
.
VERSION
. The status of the first cartridge (
E*****F
to see the status of the remaining cartridges.
, then press
MAINT TANK
E*****F
until you see
.
.
, then press
Menu
. You see
Menu
.
, then press
until you see
INK LEFT
, or matte
MK
symbols described below.
. The status of
Menu
symbols described below.
, then
USAGE COUNT
. You
,