Replacing Ink Cartridges - Epson Stylus Pro 4000 Printer Manual

80 | Maintaining and Transporting the Printer
The easiest way to check ink levels is from the control panel:
3sec.
Full
1 Matte
black
2 Cyan
* These are the cartridges used in the photographic mode. If your printer uses
the dual CMYK mode, cartridges 5–8 will contain the same colors as cartridges
1–4.
When the red B ink light is flashing (and
panel), the indicated cartridge is almost out of ink. Make sure you have a
replacement cartridge. When the light stays on and
the cartridge is empty. You must replace the cartridge before you can
continue printing.
You can install any combination of 110 ml and 220 ml cartridges. It's a good
idea to keep a set of empty 110 ml cartridges on hand at all times in case you
need to ship the printer.
4-80
1 2 3 4 5 6 7 8
4 Yellow
6 Light cyan*
3 Magenta 5 Photo black*
INK LOW
Menu
Empty
8 Light
black*
7 Light magenta*
is displayed on the LCD
is displayed,
INK OUT