Epson Stylus Pro 4000 Printer Manual page 66

66 | Printing with EPSON Drivers for Macintosh
7. If you are using non-EPSON media and you need to fine-tune its
performance, click the
8. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry on
the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Suction
printing on thinner media (less than 12 lb), such as CAD drafting
paper or backlight film.
• Paper Thickness
image when printing on unusually thick or thin paper.
2-66
button. You see this screen:
Paper Config
lets you control the ink saturation level (for example,
lets you print with
helps eliminate banding. Choose a lower
lets you decrease the paper suction level when
eliminates vertical banding and creates a sharper