Epson Stylus Pro 4000 Printer Manual page 107

Caution: To avoid spilling
ink and damaging the
printer, you must leave
the cartridges in place,
raise the ink levers, and
lock the print head.
Caution: Do not turn off
the printer by unplugging
it or turning off a power
strip. You will not be able
to lock the print head, and
ink will leak out of the
reservoir, damaging the
printer.
Maintaining and Transporting the Printer
To store partially used cartridges removed from the printer, tape over
the needle valve hole and place each cartridge in a separate, resealable
plastic bag. Be sure to remove the tape before reinstalling the cartridges.
The printer must be powered on when removing or installing ink
cartridges.
3. Raise the ink levers.
4. Make sure the print head is in the home (far right) position. Then lock
the print head by pushing the green tab to the right.
5. Turn off the printer and unplug the power cord.
6. If you need to ship the printer, you must repack it using the original box
and packing materials and secure it to a pallet. If you do not have these
items, contact EPSON to request them. Otherwise, the printer may be
damaged beyond repair.
If you are transporting the printer in your own vehicle without the
original packaging, make sure you wrap and pack the printer securely.
Transport the printer in a horizontal position on a flat, stable surface.
4-91
| 91