Epson Stylus Pro 4000 Printer Manual page 83

Note: Be sure to check
the Color Density setting.
You may need to change
it if your profile was
created to optimize
D-max and color gamut.
Printing with EPSON Drivers for Windows
You see the following:
Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
lets you control the ink saturation level (for example,
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
non-EPSON media and avoid smearing the ink. You can make the
print head wait up to 5 seconds after each pass to allow ink to dry.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
lets you decrease the paper suction level when
• Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper or backlight film.
• Paper Thickness
image when printing on unusually thick or thin paper.
3-83
lets you print with
helps eliminate banding. Choose a lower
eliminates vertical banding and creates a sharper
| 83