Canon imageRUNNER 2420 Trouble Error Codes List page 24

Code Description
There is an error on the hard
E602-
disk.
03XX
/DOSDEV2 is faulty.
There is an error on the hard
E602-
disk.
04XX
/FSTPDEV is faulty.
There is an error on the hard
E602-
disk.
05XX
/DOSDEV3 is faulty.
There is an error on the hard
E602-
disk.
06XX
/PDLDEV is faulty.
There is an error on the hard
E602-
disk.
07XX
/DOSDEV4 is faulty.
There is an error on the hard
E602-
disk.
08XX
/BOOTDEV is faulty.
There is an error on the hard
E602-
disk.
09XX
/DOSDEV5 is faulty.
There is an error on the hard
E602- disk.
There is an error in a partition
FFXX
that cannot be identified.
The image memory is faulty or
E604- is inadequate.
0000 The memory size does not
match the model.
There is an error on the HDD.
At startup, the HDD fails to
E609-
reach a specific temperature
0008
level within a specific period of
time.
There is an error on the HDD.
E609- At time of sleep recovery, the
0009 temperature fails to reach a
specific level.
The HDD coding key is faulty.
E610 The SRM/PCB is faulty. The
battery has become exhausted,
24
Increase the memory.
Replace the hard disk. Replace the DC controller
PCB.
Replace the hard disk. Replace the DC controller
PCB.
Try step 1); if it fails, try step 2). 1) Turn off and then
back on the power switch to generate the key once
again. 2) If the same error still continues, replace the
Remedy