Advertisement
Quick Links
Advertisement
Related Manuals for Clarke CAT83
Summary of Contents for Clarke CAT83
- Page 1 0504 ANGLE HEAD DIE GRINDER MODEL No. CAT83 Part No. 3110815 OPERATING & MAINTENANCE INSTRUCTIONS...
- Page 2 The graph below shows the vibration value against the maximum time the respective tool Please contact your nearest dealer, or may be used, per day. CLARKE International, on one of the following numbers. The uncertainty factor should also be taken into account PARTS &...
- Page 3 Failure to follow these precautions could Thank you for purchasing this CLARKE Angle High Pressure Hoses from 5 to 100 Metres, etc. Contact your CLARKE dealer for further result in personal injury, and/or damage to information, or CLARKE International Sales Department on 01992 565300 Head Die Grinder, designed for use when property.
- Page 4 ¼” BSP thread. longer than 24 hours, run a few drops of Clarke Air Line Oil into the air inlet, and run Line pressure, or hose inside diameter, should be the tool for 5 seconds in order to lubricate increased to compensate for unusually long air the internal parts.
Need help?
Do you have a question about the CAT83 and is the answer not in the manual?
Questions and answers