Set the date and time
After selecting the user interface language, the
Digital Pocket Memo will prompt you to set the
current date and time.
value for the year, month or day.
arrow (↑) to the next entry.
After setting the day, press the
to advance the settings to the
12-hour or 24-hour clock, AM or PM (if a
12-hour clock is selected), and to change
the value of the hour and minute settings.
date and time. The Digital Pocket Memo is
now ready to function.
If a mistake is made in setting the date/time,
procedure to step back to make corrections.
It is also possible to change the date and time
later using the menu. See
21 for more information.
to change the
to advance the
to select a
to confirm the
any time during the
After four minutes of inactivity, the Digital
Pocket Memo automatically goes into power-
save mode and the LCD screen will display the
date and time. Press any button to reactivate it.
If the Digital Pocket Memo is not used for more
than two hours, it turns off completely. Turn the
unit on by moving the On/Off switch to the
position and then back to the