Recorders.com Walkthrough Guide 1779 Wells Branch Pkwy #110B Austin, TX 78728 512.251.1302 www.recorders.com Setting up a Philips LFH9600 digital recorder with Dragon NaturallySpeaking Version 9 5/5/2007...
Security Dongle (Packaged with the Philips LHF-9600/10) is required for this software installation. * The Philips LFH-9600/10 DPM has three modes, SP – Slow Play, LP – Long Play and HQ – High Quality. You can only access the HQ mode if you set your software to DSS Pro Mode.
Philips Pocket Memo 9600 digital recorder setup guide Please note that if you have a standard microphone speech profile already set up, check the Dragon NaturallySpeaking user manual on ‘Adding a Dictation Source’. You may prefer to add an additional dictation source rather then creating a brand new one. 2.
Philips Pocket Memo 9600 digital recorder setup guide As you can see, there are a number of story options. Choose any one you wish. My favorites are: Dogbert’s Top Secret Management Handbook & Success is a Journey. Transfer your recorded speech to your computer 1.
Philips Pocket Memo 9600 digital recorder setup guide 2a. Open the Philips SpeechExec Pro Dictate software. Go to Settings/General Settings. 2b. Once the General settings dialog box opens, Click on Dictation/Automatic Conversion, then click on the Convert automatically when opening a dictation box.
2e. A Folder properties dialog box will appear, copy the path as illustrated below. Let Dragon NaturallySpeaking adapt to your user profile Good news… this is the final step to creating your mobile Philips LFH-9600 profile. 1. After complete the step above, you will be returned the Dragon New User dialog box.
Philips Pocket Memo 9600 digital recorder setup guide This dialog box allows you to listen to your recording. It also displays a Signal to Noise Ratio and whether your audio quality check passed. A Signal to Noise Ratio above 15 is acceptable 2.
Philips SpeechExec Pro Dictate v. 4.3 & Dragon NaturallySpeaking® version 9 1. After dictation is complete, connect the Philips LFH-9600 DPM to your PC through the USB cord or the Docking Station. Open the SpeechExec Pro Dictate/Transcribe software.