Registering A Unit - Panasonic KX-TG6461AL Operating Instructions Manual

Program this setting using either the base unit or
one of the handsets.
Important:
L When the unit receives a call from a number that
is stored in the call barred list, the call is logged
in the caller list (page 27) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
barred list by using the caller list or by entering the
numbers directly.
Important:
L It is advised to store the phone number with an
area code in the call barred list.
= Base unit
■ From the caller list:
1
\ (right soft key)
2
{V}/{^}: Select the entry to be barred. i
8
3
{V}/{^}: "Add Bar List" i M
4
{EXIT}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{EXIT}
Y Handset
■ From the caller list:
1
8 (middle soft key)
2
{V}/{^}: "Caller List" i M
3
{V}/{^}: Select the entry to be barred. i
8
4
{V}/{^}: "Add Bar List" i M
5
{ih}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{ih}
Viewing/editing/erasing bar call numbers
= Base unit
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {EXIT}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {EXIT}
■ Erasing a number:
W i {V}/{^}: "Yes" i M i
{EXIT}
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {ih}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {ih}
■ Erasing a number:
W i {V}/{^}: "Yes" i M i
{ih}
Note for base unit and handset:
L When editing, press the desired dial key to add,
^ to erase.

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L The additional handset model recommended for
use with this unit is noted on page 4. If another
handset model is used, certain operations (base
Programming
25