Registering A Unit - Panasonic KX-TG6631 Operating Instructions Manual

Programming
Block calls without phone number
You can reject a call without phone
number including "Out of area",
"Private caller", or "Long
distance".
1
MMENUN M#N M2N M4N M0N
2
MCN/MDN: Select the desired setting.
A MSAVEN A MOFFN
Viewing/editing/erasing call block
numbers
1
MMENUN M#N M2N M1N M7N
2
MCN / MDN: Select the desired entry.
R To exit, press MOFFN.
3
To edit a number:
MEDITN A Edit the phone number.
A MSAVEN A MOFFN
To erase a number:
MERASEN A MCN / MDN: "Yes" A
MSELECTN A MOFFN
Note:
R When editing, press the desired dial
key to add, MCLEARN to erase.
R When viewing, "Block w/o num" is
displayed if the block calls without
phone number feature is turned on.
To turn the feature off:MERASEN A
MCN A MSAVEN A MOFFN

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
R See page 5 for information on the
available model.
34 For assistance, please visit http://www.panasonic.com/help
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
MMENUN M#N M1N M3N M0N
2
Base unit:
Press and hold MLOCATORN for
about 5 seconds until the
registration tone sounds.
R If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
R The next step must be completed
within 90 seconds.
3
Handset:
Press MOKN, then wait until a long
beep sounds.
Note:
R While registering, "Base in
registering" is displayed on all
registered handsets.
R When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to
end its wireless connection with the
system.
1
MMENUN M#N M1N M3N M1N
R All handsets registered to the
base unit are displayed.
2
MCN/MDN: Select the handset you
want to cancel. A MSELECTN
3
MCN / MDN: "Yes" A MSELECTN
4
MOFFN