Useful Information; Character Entry - Panasonic KX-TG6461AL Operating Instructions Manual

Useful Information

Character entry

= Base unit / Y Handset
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned
to it. The characters that can be entered depend on the character entry mode (page 38).
– Base unit: Press {7} or {8} to move the cursor left or right.
Handset: Press {^} or {V} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press ^ to erase the character or number highlighted by the cursor. Press and hold ^ to erase
all characters or numbers.
– Press {*} to switch between uppercase and lowercase.
– To enter another character that is located on the same dial key:
Base unit: Press {8} to move the cursor to the next space.
Handset: Press {V} to move the cursor to the next space.
Note for handset:
L If you do not press any dial key within 5 seconds after entering a character, the character is fixed and
the cursor moves to the right.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (F), Extended 1
(G), Extended 2 (H), and Cyrillic (I). When in these entry modes except Numeric, you can select
which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
/ (right soft key) i {V}/{^}: Select a character entry mode. i M
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (M)
38