Maintenance - MasterCraft 54-8306-8 Owner's Manual

GENERAL
!
WARNING:
tool, use only identical replacement
parts. The use of any other part may
create a hazard or cause product
damage.
DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust,
oil, grease etc.
!
WARNING:
fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come
into contact with plastic parts. They
contain chemicals that can damage,
weaken or destroy plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool and the
workpiece.
!
WARNING:
modify tools or create accessories. Any
such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
injury. It will also void the warranty.

MAINTENANCE

When servicing this
Do not allow brake
DO NOT attempt to
It has been found that electric tools are
subjected to accelerated wear and
possible premature failure when they are
used on fibreglass boats and sports cars,
wallboard, spackling compounds or
plaster. The chips and grindings from
these materials are highly abrasive to
electric tool parts such as bearings,
brushes, commutators, etc. Consequently,
it is not recommended that this tool be
used for extended work on any fibreglass
material, wallboard, spackling compounds
or plaster. During any use on these
materials it is extremely important that the
tool is cleaned frequently by blowing the
accumulated debris out with an air jet.
!
WARNING:
goggles or safety glasses with side
shields during all cutting operations. It
is critical that you wear safety goggles
or safety glasses with side shields and
a dust mask while blowing dust out of
the circular saw with an air jet. Failure
to take these safety precautions could
result in permanent eye or lung
damage.
LUBRICATION
All of the bearings in this tool are
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
22
Always wear safety