Laser Switch; Laser Adjustment - MasterCraft 54-8306-8 Owner's Manual

LASER SWITCH

This saw is equipped with a laser guidance
system for more precise cutting.
To turn the laser ON, press the laser
switch (1) once (Fig. 10). To turn the laser
OFF, press the laser switch again.
!
DANGER:
Never allow the laser
beam to shine into a person's eyes.
Serious eye damage could result.

LASER ADJUSTMENT

The laser guide line should be centered in
the 0° cutting groove (1) (Fig. 11). If the
laser guide line is not correctly centered it
can be centered as follows:
Moving laser line to the left
1. Turn the left laser adjustment screw
(2) counter clockwise ¼ turn.
2. Turn the opposing laser adjustment
screw clockwise ¼ turn.
3. Repeat steps #1 and #2 until the laser
guide line is moved to the correct
location.
Moving laser line to the right
1. Turn the right laser adjustment screw
counter clockwise ¼ turn.
2. Turn the opposing laser adjustment
screw clockwise ¼ turn.
3. Repeat steps #1 and #2 until the laser
guide line is moved to the correct
location.
ASSEMBLY AND OPERATING
17
Fig. 10
Fig. 11