Siemens SINAUT MD720-3 System Manual page 67

11. Open the tab Modems, select the Standard 19200 bps modem and click
Properties.
12. Select the tab Modems again and set the maximum speed to 57600. Then
click OK twice.
13. Click Start, Control Panel. In the Control Panel window (classic view) double-
click System, then select the tab Hardware.
14. Click the Device Manager button. In the Device Manager window beneath the
item Modems double-click the Standard Modem 19200.
15. In the Properties window of this modem select the Modem tab. Set the speed
to 57600. Close the window.
Installation of a Network Connection
The communication with the SINAUT MD720-3 in service mode is made via a
network connection.
1. Open the Control Panel in the Start menu.
2. Using Windows XP open the category Network and Internet Connections.
3. Select Create a connection to the network at your workplace and follow the
New Connection Wizard.
4. Select Dial-up connection and click Next.
5. From the shown list select the Modem – Standard 19200 bps Modem being
installed before and click Next.
6. Enter a name for the new connection, e.g. Service-MD720 and click Next.
7. Enter the phone number *98# and click Next.
8. Finish the installation wizard by clicking Finish.
9. Open the Start Menu and select the new connection (e.g. Service-MD720) in
the menu Connect to.
10. Open Properties, select the Modem – Standard 19200 bps Modem and click
Configure.
11. Choose the Maximum speed 9600 bps. Enable the hardware flow control
and disable the other options.
12. Click two times OK to close the Modem Configuration and Properties.
SINAUT MD720-3
C79000-G8976-C211
Service functions
67